Questions in In Dash Digital Depth Sounder (DF1000D) (D10D)
- Why will my DF1000D not turn on? [en](571 views)
- Why is the bottom reading random, or appears as “---" on the display? [en](3691 views)
- Can I use my current transducer from a different depth sounder? [en](2081 views)
- The numbers on my display are dim? [en](2324 views)
- What can I do to extend the life of my DF1000D? [en](644 views)
- Can I have multiple DF1000D displays on one transducer? [en](473 views)
- My new DF1000D Display has a plug for the transducer connection, yet the transducer on my boat from the previous DF1000D has no plug. How do I attach the new display to the old transducer. [en](624 views)
- How do I install the Transducer for the DF1000D? [en](1001 views)
- I bought 2 of these for my house boat.I put them in the petroleum jelly and tried them there. When i first turn them on i get a reading for about 5 seconds then get --- and thats all. [en](855 views)
- Can the DF1000D be used on aluminum hull boats
either in hull or through hull transducers. [en](350 views)
- All I get is "---" readings on my depth sounder in certain places. I've noticed that these places have very soft/muddy bottoms and/or very dirty/silty water [en](622 views)
- I want to replace my depth sounder made by another manufacturer with your DF1000D but would prefer not to have to replace my existing transducer. Can I splice the old cable onto the new and if so, how? The transducer that I have is 192kHz, output power 275 watts peak to peak, 34.4 watts RMS and receiver sensitivity -80 db temperature stablized. Yours is 200 kHz. [en](760 views)
- Is it possible to occasionally turn off the audible alarm but continue to get a digital readout?
[en](463 views)
- I purchased the DF1000D and just exchanged the included transducer for the Airmar P79 because the original one wasn't able to work thru the fibergalss hull of my sailboat.
I don't seem to be able to find any instructions on the Norcross or the Airmar web sites or in the installation literature regarding how to hook the two together. The DF 1000 has a plug (I gather with 3 wires leading into it) while the Airmar adapter cable ends in 5 wires. How do I connect the two? [en](365 views)
- Spet 3 of the Transom Mounting the transducer section of my D10D manual say to "Locate the Transom Template inserted in this manual.". I cannot find this template, where can I get it? [en](706 views)
powered by phpMyFAQ 1.4.1